Actwin Smart counter automation; Is energy management and OSOS software that automatically collects consumption, analysis and status information from devices such as electricity, gas, water meters, calorimeters, energy analyzers and volume correlators, and provides reports and bills through collected data.
Actwin Smart Counter Automation | General features
Actwin Smart meter automation is characterized by the following features:
Turkish and English language support is provided.
Microsoft SQL, Oracle, etc., widely used in the market and proven to be reliable. Databases can be used.
The software works in three different forms as "server", "client" and "internet" interface.
The server runs as a part of the system that will create the main engine running on the backplane.
The client interacts with the server and is the part of the system where the management of the system is done and the detailed authorization is in place. Server and client implementations work as desktop applications.
The internet interface works as a part where participants (factory etc.) can enter the system and display their own consumption information and reports.
Actwin Smart Counter Automation | Communication
Actwin Smart meter automation supports the following communication protocols and interfaces, but has been developed in a modular structure to enable further protocols to be added later.
Communication Protocols
IEC 62056-21 Mode C and constant baud rate
DLMS / Cosem
Modbus-RTU
Modbus-TCP / IP
M-Bus
Wireless M-Bus
Communication Interfaces
Serial communication (RS485, RS232)
GPRS
M-Bus
Ethernet
The communication principle is available to work with "push" and "pull" methods. Which device is to be read at which time interval, which data to read from the devices and how often to store it in the database can be defined on the management screen, at the measurement point basis.
The communication module starts automatically when the server is started with the Windows service logic. In addition, involuntary closure can be prevented.
Actwin Smart Counter Automation | Reporting
With Actwin Smart Counter Automation, the following reports can be obtained via collected data. The modular structure that allows new reports to be added is also included in this section. There is no need to change the system when adding a new report on this page. All reports can be exported as MS Excel, MS Word, HTML and PDF file.
Reporting of all the measurements taken from the devices in tabular form on the basis of measurement
Drawing graphs with measurements taken from devices
Consumption of multiple measuring points, average, etc. Comparison with algorithms
Reporting of ratios of electricity meters to reactive energy and active energy consumption
Reporting of consumption on electricity meter based energy tariffs
Distribution network loading (transformer, gas stations) reports
Daily, monthly, annual consumption reports based on measurement point and general
Indication of the measurement points on the map and indication of problematic points (reactive energy, low consumption, loss / leakage, non-communication etc.)
Transformer loss report
Monthly and annual energy consumption in all settlements, bought / sold benchmark
Report of defined and unidentified gas components
Natural gas minimum / maximum hourly, daily withdrawal report
The electricity distribution network can be shown on a single line and information can be added on this line, such as electricity meters, secondary protection relays and power quality.
The energy, power, current / voltage values of the counters, open / trip states of the secondary protection relays, power and current / voltage information of the quality recorders can be displayed on a single line.
For gas meters, measurement information of B and C type stations, filter pollution status, door / valve status can be displayed on a single line.
Actwin Smart Counter Automation | Lost / Leak Detection
Lost / leak reports can be created manually as well as automatically generated and reported daily to relevant persons by e-mail.
Currents / voltage / power / power factor / phase angle, etc. The operator can be warned in unexpected situations by constantly monitoring the parameters.
Unexpected differences are found by comparing consumption of main distribution centers with consumption of sub-centers and / or consumers.
Counter, such as panel cover interventions can be detected immediately alert operator. Other alarms can also be defined as alarms for immediate intervention.
Actwin Smart Counter Automation | Data Verification
Measures taken from the scene must not be used in bills and reports without passing through a data validation system. For this reason Actwin Smart Counter Automation uses the following data validation methods.
Whether it is within a specified limit
Percentage of past consumption
The situation according to the previous measure
Whether it is within the standard deviation from the average in the last billing period
If yes, the compatibility of my measurement unit with measurement
Actwin Smart Counter Automation | Integration
The Actwin Smart Counter Automation System can be provided by using Mimaride Web Services, which can provide simultaneous connection with other systems (ERP, Accounting, Geographical Information, Bank etc.).
With Actwin Smart Counter Automation, all kinds of recordings of the measurement points defined in the system and the subscriptions to which these measurement points belong are kept. If requested, an inventory report is obtained from these records.
In order to define a new subscriber and / or measurement point in the subscriber management system, new records may be opened with copy / paste from an existing subscriber or point without having to have expert knowledge.
There is no limit on the information to be defined for subscriptions. Some of this information is as follows.
Subscriber number
Subscriber Title
Address / Parcel Info
Subscription Tiers
Subscriber Start Date
Authorized Person (At least three people)
Phone, fax, e-mail, etc. contact information
Tax information
GPS coordinates
Reports can be received via defined subscriptions and grouping, sorting and filtering can be done through these reports.
Actwin Smart Counter Automation | Internet Interface
With Actwin Smart Counter Automation, the internet interface is used to provide the supplier / consumer interactions required for the network to be characterized as a smart network. Access to the internet interface will be username and password protected, and all users can only follow their own measurement points.
In terms of security, the system is not directly communicating with the database even though it is on the internet. Communication between the Internet interface and the database will be performed via a secure web service layer.
Users will be able to view instantaneous and historical measurements of their measurement points.
Administrators will be able to view bulk or personal messages that they have notified themselves.
Freelancers will be able to receive their own OSF7 reports.
Natural gas consumers will be able to report their consumption forecasts to the center and track their realizations online.
Reactive penalties, demand overruns, maximum and minimal gas consumption can be warned.
The event records that occur in the measuring devices can be recorded and reported in the database.
The system continuously monitors the reactive energy consumption and informs the users approaching and exceeding the limit by e-mail and SMS.
E-Mail and SMS can be recorded and reported later.
Actwin Smart Counter Automation | Delegation
Roles can be defined in the system according to the predefined authority. Users can be defined and roles can be assigned to these users so that different staff can log in to the system.
Generally speaking, authorities will define which reports users can create, what settings they can change, and what actions they can stop / start.
The system can perform authorization based on measurement point. It is possible to define which users can access which measurement points.
