The active MS Series Compensation Board draws attention with the following advantages:

The modular construction of the cassettes in the area provides ease of maintenance and installation.

Thanks to the capacitors of Asset VCB series, it has 1.18 x Vn and 1.50 x In overvoltage and current resistance and can operate at 520 V continuous voltage.

The harmonic filter reactor in the cassettes is used to protect the capacitors against harmonics.

Based on the extreme equations of the capacitors, the capacitor impedance decreases with increasing frequency. The harmonics that come into play due to the effects of various harmonic sources, the way that the impedance is the lowest, ie the capacitors, the over current and the voltage drop on the capacitors. However, the increase in current and voltage disturbances as a result of the resonance effect, which may be caused by the existing harmonics in the system, causes damage to the sensitive loads as well as damage caused by the compensation system. It is necessary to use a harmonic filter reactor to prevent these failures and harmonic accumulation on the capacitor.

Active MS Series Compensation Panels The Asset R7 range is designed using modular cassettes with filters and high-tech digital reactive power control relays.

In this way Active MS Series Compensation Panels can work continuously at 520 V mains voltage by achieving a high efficiency and achieving a unique 18% voltage and 50% current durability.

Asset R7 series compensation tapes offer the possibility to limit the sudden discharge currents and provide high level resistance against the voltage damages that may occur in the network or operation and the application with high quality equipment extends the service life and ensures a reliable system.

Active MS Series Compensation Panels In capacitor bank applications, the creation of a modular design of the Asset R7 series filter compensation cassettes gives the whole system a modular structure. This allows the user to work in a very practical way, such as adding prospective steps, making student-dependent changes on step powers.

The Active MS Series Compensation Panels activate and deactivate the capacitor stages with the control of the advanced technology digital reactive power control relay used. The reactive power control performs the switching operation of the electromechanical contactors by determining the required reactive power in response to the current and voltage measurement data received from the relay system. Knowing the capacitor power at each level, the relay only takes in and removes the required steps. In this way, reactive power needs are met quickly. By triggering the contactor at the minimum level to meet the required reactive power, the life of the equipment is extended by reducing the contactor and condenser wear.

Active MS Series Compensation Panels All capacitors with filtered filters are tested according to the standards. The system is ready to commission the system after power connections are made.

The Active MS Series Compensation Panels are designed with the touchscreen protection, durability and harmonic limitations, which eliminates the parallel resonance in the system, eliminates the on-site switchgear system and sensitive loads, harmonic source problems and low harmonic harmonic filtration, Is emerging.