The Bender PEM5xx Energy Analyzer draws attention with the following advantages:

The PEM 500 series network analyzers perform current and voltage harmonic measurements up to 31 ° C, which is an indispensable parameter in the deep analysis of the electrical infrastructure. This makes it possible to make more detailed analyzes with measurements such as voltage, current, frequency, power, etc., which are common measurement parameters, by easily observing the distortions on the mains. PEM 500 series network analyzers can measure voltage and current at 0,2% accuracy level and according to these measurements Class 0,5s energy measurement according to IEC 62053-22 standard can be obtained. This is a high precision industrial meter class.

The measurement values ​​on the PEM 500 Series network analyzers can be read easily from the LCD screen or communicated via Modbus-RTU and Modbus-TCP protocol.

There are 6 digital inputs and 3 digital outputs on the PEM 500 series network analyzers. These outputs can be programmed according to the digital inputs or the gauge such as current, voltage. Electrical system can be used for measurement and control purposes at various points on automation.

The energy flows at the point where the analyzer is located can be actively-reactively measured according to production and consumption conditions, and system reactive energy usage can be monitored. Neutral current is obtained by calculation method. Password protection is also available to prevent unauthorized entries when changes are made to the menu part where settings such as connection mode and communication are changed.

The 96x96 device box provides easy access to the panel for general use. The measurement sampling rate is PEM533 te 3,2 kHz and PEM555 te 6,4 kHz. The coupling port has galvanic isolation.