POWERGUARD 3 Phase Input, 3 Phase Output Uninterruptible Power Supply General Features
POWERGUARD UQ33-PRO 10-120 KVA IGBT DOGRULUCU and TRAFOSUZ
POWERGUARD UQ33-PRO-T 100-800 KVA IGBT TRIGGER AND ISOLATION TRAFFOL
GENERAL FEATURES
Selectable input / output voltage and frequency:
380/400/415 VAC or 50 / 60Hz. Can be selected.
Wide input voltage range:
At 100% load, 320-480VAC / 50% load at 240-480VAC
Wide input frequency range:
40Hz to 60Hz through the input frequency range 60Hz when required in environments using 50Hz mains frequency. Output frequency can be selected and used as a frequency converter.
Generator compatibility (power walk-in):
When full load at system output and system is empty and battery group is empty, the circuit enters the circuit slowly or slowly within a certain period of time so that the system does not overload the generator or generators. (Power Walk-in). This value is set between 5 and 30 seconds in 1 second steps.
High input power factor with IGBT rectifier:
The input power factor of the system is 0.99 and it minimizes the consumption of rectified or recycled electricity from the network.
Battery test:
Programmable battery test gives error warning in case of any battery failure.
Adjustable Charge Characteristic:
With this feature, the battery charger which is suitable for battery type such as VRLA, AGM, GEL etc. is selected and battery life max.
Power factor 0.9 (Cos phi):
Thanks to the 0.9 input power factor, it can carry 10% more load than its competitors. For example, for a UPS of 120 kVA, 100 kVA of the UQ33-PRO series can be used compared to the 120 kVA bid of competitors.
Backfeed protection:
Thanks to its Bacfeed protection feature, it is fully compatible with current and voltage boosting systems such as CNC.
EPO (EMERGENCY POWER OFF):
In case of emergency such as fire or earthquake, it can be completely disabled automatically by remote switch.
Advanced error codes:
Thanks to the advanced coding system prepared with the aim of detecting faults in the system, it is easy to find out which fault is in which part and the fault can be understood at a glance on the screen of the fault system.
Graphic and alphanumeric Turkish LCD display:
The graphic display of the UPS provides fault and monitoring of all parameters. The output sinusoidal wave of the device can be monitored from the screen.
Smart mode:
Thanks to the Smart mode, the UPS line-interactive can continue to work if the mains voltage and frequency are within certain (adjustable) limits, or on-line when out of bounds.
